Portable Windsocks

"Portable windsocks go anywhere, detects 1 MPH winds, and can be retracted to 59" and raised to 21' instantly!"

Portable use of Windsocks in now possible.

Wind Tracker 621 - Portable Windsock System
Sales: 800-707-3524

A portable wind direction system. Detect air movement at low speeds for industrial safety, intentional releases of harmful chemicals and other harmful airborne agents. If you are an ultra light pilot, air show performer, work in emergency rescue, forestry, ambulance, or evacuation, this is the windsock to have. Small & compact, retracts to only 59" and opens up to 21' instantly! Fast setup, it's great for mobile use. Use the Wind Tracker 621 to determine safe assembly areas for your personnel. For permanent ground installations use the Wind Tracker 321 airport windsock model
.Raises from 59" to 21' instantly! - Detect low winds - Great for portable use.

Strong fiberglass Wonder Pole^® telescopes from 59" to 21' high.
Quick removal to transport.
New patented pivotal harness system keeps flag tangle free.
Dynamic safety windsock/flag detects any wind movement.
Pocket size wind speed charts for field use.
Deluxe heavy duty Heavy duty Dupont® nylon carry bag for pole and flag set.
Item #wdws621_6002 (Safety Yellow & Black)
Item #wdws621_6001(Alert Orange)
Wind Tracker 621 $179.00
Weight: 10 lbs.
Availability: In Stock

Buy Now
Portable wind sock guarantee

Ships UPS

Portable Wind Tracker field windsock system fully closed for transport.

Portable WindSock Accessories

Wheel Stand
ws24
$69.00

Wheel Stand 24 Pro (Item# ws24)
Place the stand under any vehicle tire and your set to go. The 24" steel base plate keeps the pole a safe distance from the car, trailer or truck. All other tire stands are only 14" and leave little room between the car and the pole. The Wheel Stand Pro™ riser is marked for safety and has a sleeve to eliminate any break points commonly found on other tire stands. Because we make the stand for our poles there are not thumb screws or bolts needed to hold the pole. Screws and bolts can damage the pole.
24 hour secure service

Specifications:
The Wheel Stand Pro™ measures 24" long, 6" wide, and has a 10" riser. It is constructed of 1/4" steel and weighs 12 pounds. The unit is painted silver, and has a red banded marker at the top of the riser. The sleeve is 12" high, and accommodates a 1 1/4" Wonder Pole.

Back to the Top of Page

Portable base for fiberglass pole
Base2410
$89.00
Available in 3 colors.

Portable base for Wind Tracker Windsock System 621

Windsock Base (Item# base2410)
Place the stand on any surface and fill with water or sand. The unit will support the windsock mast without falling over. One person can set it up and it is easy to empty. Designed to take up a minimum of space, and solve the problem of how to put your flag & pole anywhere you want.This base is great for placement in the back of trucks or all terrain vehicles.
24 hour secure service

Specifications:
The stand measures 24"around, 10" high, and has drain plug at the top for easy filling. The color is black and constructed of rugged poly materials for long life and service. A galvanized metal sleeve protects the pole and base. The stand weighs 13 pounds when empty. Available in 3 colors, Black, Gray, Blue.

Windsock Base (Item# base2410_black)
Windsock Base (Item# base2410_gray)
Windsock Base (Item# base2410_blue)

WONDER POLE SPECIFICATIONS

Our newest and most versatile pole ever. Constructed of Circ" would 1/8" wall, non-conductive fiberglass. There are 6 nesting sections with a 2" diameter base, and a 3/4" top mast. Sections are factory fitted with our Sure Lock™ grips for instant set up and take down. When fully extended it reaches 21' high, and closes down to only 59" for fast & easy storage. You can raise the pole to any desired height. The pole weighs approximately 8.5 pounds and is white in color. A heavy duty Dupont nylon travel bag is included for transport or storage of the pole and wind flag. Use this pole with our Wheel stand Pro 24™ or our portable base for mounting on any surface. This pole will withstand harsh winds and sudden gusts in excess of 75 MPH

Tell A Friend

Sales:1-800-707-3524
Fax: 1-503-585-4294

Back to the Top of Page

Details:
This unit is designed to meet both portable and permanent situations. The rugged construction of the pole and flag system and ease of use make it ideal for rapid deployment in the field or at home base. The rigors of transport will not damage this unit. Hazmat teams, jump teams, balloonist, oil field and refinery situations are just a few of the applications where this wind system fits in. Visibility is a minimum of 1/4 mile, and the contrasting colors of the flag alert area personnel as to the direction and speed of the wind. Windsocks cannot perform satisfactorily and are truly obsolete for low wind detection where gases or harmful particles can injure persons or property. Because the patented pivotal harness moves in six directions and has no mechanical parts to artificially aid in movement the true wind sped an direction are made visible. There is no tube shape like socks which fails to use the full wind movement. The sock design must first move air through the large opening and out the smaller end. A low wind, often up to 6-8 mph will not fill the sock and barely moves the windsock. Once there is a sufficient amount of wind force to get the windsock moving a cross wind has to fight that volume of air in the sock, and the visible direction of the wind to the observer can be delayed or seen as less than accurate. There are no tools required for assembly of the Wind Dancer Wind System.

The pivotal harness & flag come assembled. As air currents move along the flag it rises & falls with side-to-side movement as the wind changes directions. When the flag attempts to "dive off", it is pulled back into the winds force by the harness cords. This patented harness and its ability to keep the flag in position allows it to animate the wind at any speed, and at all times.

The patented pivotal harness rotates without the aid of ball bearings or other devices The Glide Plate rotates 360 degrees within the Glide Collar by wind force alone. This is important because there is no added friction to artificially slow down or force to create a spin effect.

Vertical flag movement from side view. The flag lifts the Glide Plate from the surface of the collar and rotates with a minimal amount of surface contact. There are no mechanical parts to jam or wear out.

The harness cords allow the side-to-side tilting motion of the flag which not only detects wind shear and variability of direction, but also creates an animation, and visual recognition of wind variability at a glance.

Back to the Top of Page

Our 100% GUARANTEE. If the Wind Tracker Wind System does not out perform your windsock, or, if you are not completely satisfied, return it for a complete refund.

"If safety is an issue,wouldn't you want the best you could get?"

COMPARE THE WIND TRACKER TO ORDINARY WINDSOCKS	WIND DANCER	WINDSOCKS
Can detect wind at speeds lower than 6 MPH	YES	NO
Can be adapted to any pole or flagpole.	YES	NO
Can be used as combination permanent or portable unit.	YES	NO
Can install without tools.	YES	NO
Can move in 6 directions to show wind variations.	YES	NO
Can use with other flag or mechanical systems.	YES	NO

A Partial List of applications & current use

Evacuations by schools, businesses, recreational facilities.

Hazardous Materials.

Refineries

Golf Courses

Heliports

Waste Water Treatment Plants

Government

Armed Forces

Cold Storage Facilities

Unmanned Aircraft

Waste sites

Hang gliding

Oil fields

Oil Refineries

Painting at ship yards.

Large profiles carried by workers from one building to another.

Wind indicator for tear gas release in correctional institutions.

Bomb disposal sites.

Military exercises, direction of smoke & gases.

Jump teams ground wind system.

Hot air Balloonist & chase teams.

Power Parachutes.

Prisons for directions of intentional gas release.

Ammonia plants for evacuation lanes of personal.

Agricultural for drift prevention.

Small airports.

Field burning.

Portable units for Red Cross & other organizations.

Marker flag for areas of student assembly.

Airport Windsocks

Nuclear power plants.

Wind flags shooting

Portable use for landing medical helicopters in hard to reach terrains.

Back to the Top of Page

.01__________________________6 MPH

The comparison above illustrates the superiority of the Wind Dancer Wind System compared to windsocks.

Tell A Friend

Makes windsocks obsolete.
24 Hour Online Secure Purchasing

Mobile: 1-503-999-3673

WIND SPEED & DIRECTION
There are a thousand uses for this Wind Dancer system. Shooting ranges, field burning, pesticide applications, oil fields, waste treatment plants, just to name a few.

FIELD OBSERVATION & RECOGNITION:
As an observation and field recognition system it gets even better. The visibility is a minimum 1/4-mile away! Landing craft can determine the speed and direction of the wind before approaching shore. Balloonist, surfers, hang gliders, para sailers, parachute landings, use this flag with the field guide for instant visual recognition of the wind direction, speed, and gusts.

LOCATORS:
Schools and other organizations can utilize this device to establish areas to assemble. The flag never wraps around the pole, and can be seen from long distances. Use one color to signal "Danger", one for "Meet Here", and another for "All Clear". Scouting groups can establish rendezvous points, camp headquarters, and carry the unit with them for field identification. The pole is fiberglass, telescoping from 8' to 21' high. The pole weight is only 5.5 pounds. Sturdy construction, and made in the USA it has a full one year guarantee.

For more information, please call us toll free at 1-800-707-3524.

Back to the Top of Page